Charge Air Cooler Hoses: Notes

HOSE - CHARGE AIR COOLER TO THROTTLE BODY 

Fig 1: Charge Air Cooler Hoses

Courtesy of CHRYSLER LLC

1. Remove air cleaner housing. See Engine/Air Intake System/BODY, Air Cleaner - Removal .
2. Remove battery and battery tray. Refer to Electrical/Battery System/TRAY, Battery - Removal .
3. Remove hose (1) from charge air cooler (2).
   Fig 2: IAT Sensor

   Courtesy of CHRYSLER LLC

   1 - HOSE - CHARGE AIR COOLER TO THROTTLE BODY

   2 - IAT SENSOR

   3 - TIP HOSE

4. Disconnect inlet air temperature (IAT) sensor (2).
5. Disconnect throttle inlet pressure (TIP) hose (3) from charge air cooler hose (1).
6. Remove hose (1) from charge air cooler.