Cylinder Head Off

Fig 1: Valve Seal and Spring

Courtesy of CHRYSLER LLC

1 - VALVE LOCKS

2 - VALVE RETAINER

3 - VALVE SPRING

4 - VALVE STEM SEAL

5 - VALVE STEM

With cylinder head removed from cylinder block, compress valve springs (3) using a universal valve spring compressor.
Remove valve retaining locks (1), valve spring retainers (2), valve springs (3), and valve stem seals (4).
Before removing valves (5), remove any burrs from valve stem lock grooves to prevent damage to the valve guides. Identify valves, locks and retainers to insure installation in original location.
Inspect the valves. See Engine/Cylinder Head/SPRING(S), Valve - Inspection .