Body - Interior & Exterior: DECKLID/Hatch/Liftgate/Tailgate: Striker: Removal: Removal

Fig 1: DECKLID LATCH STRIKER

Courtesy of CHRYSLER LLC

1. Open the liftgate.
2. Remove the liftgate sill scuff plate. See Body/Interior/PLATE, Scuff - Removal .
   NOTE: Place a reference mark along the outer edge of the striker to ensure it is reinstalled to its original position.
3. Mark the position of the striker (1) on the liftgate opening lower panel (3) to aid installation.
4. Remove the two screws (2) that secure the striker to the lower panel and remove the striker.