Diagnostic Test

CHECK FOR AN ACTIVE DTC
1. Turn the ignition on.
2. With the scan tool, record and erase DTCs.
3. Press the TRIP/TOGGLE switch three times.
4. With the scan tool, read DTCs.
  Does the scan tool display: B1265-TRIP/TOGGLE SWITCH STUCK?
  
  Yes
  - Replace the Instrument Cluster in accordance with the service information.
  - Perform the BODY VERIFICATION TEST. Refer to DTC-Based Diagnostics/MODULE, Totally Integrated Power (TIPM) - Standard Procedure .
  No
  - Test complete.