C2312

C2312-TRAC/ESP OFF SWITCH STUCK

For a complete wiring diagram, refer to the Wiring Information Electrical Diagrams.

- When Monitored:
With the ignition on.

- Set Condition:
The Instrument Cluster detects the TRAC/ESP OFF Switch active for greater than 20 seconds.





CHECK FOR AN ACTIVE DTC
1. Turn the ignition on.
2. With the scan tool, record and erase DTCs.
3. Press the TRAC/ESP OFF switch three times.
4. With the scan tool, read DTCs.

Does the scan tool display: C2312-TRAC/ESP OFF SWITCH STUCK?

Yes

- Replace the Switch Bank.
- Perform the BODY VERIFICATION TEST. Body Verification Test.

No

- Test complete