B225C

B225C-COMPASS MODULE INTERNAL

For a complete wiring diagram, refer to the Wiring Information Electrical Diagrams.

- When Monitored:
With the ignition on.

- Set Condition:
The Compass Module detects an internal failure.





CHECK FOR AN ACTIVE DTC
1. Turn the ignition on.
2. With the scan tool, record and erase DTCs.
3. Wait 30 seconds.
4. With the scan tool, read DTCs.

Does the scan tool display: B225C-COMPASS MODULE INTERNAL?

Yes

- Replace the Compass Module.
- Perform the BODY VERIFICATION TEST. Body Verification Test.

No

- Test Complete.