LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> PT Cruiser Base, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> DECKLID/Hatch/Liftgate/Tailgate >> Latch, Control >> Removal >> Removal

Latch, Control: Removal: Removal

Fig 1: LINKAGE AND ELECTRICAL CONNECTORS REMOVAL/INSTALLATION
GC0116207Courtesy of CHRYSLER LLC
  1. Disconnect and isolate the negative battery cable.
  2. Remove the liftgate trim panel. See Body/Decklid/Hatch/Liftgate/Tailgate/PANEL, Trim - Removal .
  3. Disconnect the liftgate wire harness connectors (1) and disengage the connector retainer from the liftgate latch control (3).
  4. Disengage the retainer clips that secure the linkage rods (2) to the latch control and disconnect the linkage rods.
  5. Remove the two bolts that secure the latch control to the liftgate and remove the control.
scientia non olet · About LEMON Manuals