LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine & Automatic Transmission Cooling System >> Engine >> Thermostat >> Removal >> 3.0L Diesel

3.0L Diesel

  1. Disconnect negative battery cable.
  2. Remove engine cover.
  3. Drain engine coolant. See Cooling - Standard Procedure .
  4. Remove bracket for fuel line.
  5. Remove coolant hoses and thermostat housing.
  6. Remove thermostat housing.
  7. Clean all sealing surfaces.
scientia non olet · About LEMON Manuals