TUBE, Heater Hose, Supply: Removal: 5.7L/6.1L

Fig 1: Heater Hose, Clamp, And Tube

Courtesy of CHRYSLER LLC

1 - Heater Hose

2 - Clamp

3 - Tube

1. Disconnect negative battery cable.
2. Drain cooling system. See Cooling - Standard Procedure .
3. Remove intake manifold. For 5.7L, refer to REMOVAL . For 6.1L, refer to REMOVAL .
4. Remove heater hoses from heater tubes.
5. Remove heater tube mounting bolts.
6. Remove heater tubes from water pump housing and remove from vehicle.