LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine & Automatic Transmission Cooling System >> Engine >> SENSOR, Coolant Temperature >> Removal >> 3.5L

SENSOR, Coolant Temperature: Removal: 3.5L

Fig 1: Engine Coolant Temperature Sensor - 3.5L
GC0095213Courtesy of CHRYSLER LLC
1 - CAMSHAFT POSITION SENSOR
2 - ENGINE COOLANT TEMPERATURE SENSOR
  1. Disconnect negative battery cable.
  2. Partially drain cooling system. See Cooling - Standard Procedure .
  3. With the engine cold, disconnect coolant sensor electrical connector.
  4. Remove sensor (2).
scientia non olet · About LEMON Manuals