LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine & Automatic Transmission Cooling System >> Engine >> PUMP, Water >> Removal >> 5.7L/6.1L Engine

5.7L/6.1L Engine

Fig 1: Water Pump - 5.7L/6.1L
GC0095211Courtesy of CHRYSLER LLC
1 - WATER PUMP ASSEMBLY
2 - BOLT
3 - DOUBLE ENDED BOLT
  1. Disconnect negative battery cable.
  2. Drain cooling system. See Cooling - Standard Procedure .
  3. Remove radiator fan assembly. See Cooling/Engine/FAN, Cooling - Removal .
  4. Remove accessory drive belt. See Cooling/Accessory Drive/BELT, Serpentine - Removal .
  5. Remove thermostat. See Cooling/Engine/THERMOSTAT - Removal .
    NOTE: The water pump mounting bolts (2) are different lengths. Note the location of the water pump mounting bolts (2).
  6. Remove water pump mounting bolts (2) and remove water pump (1).
scientia non olet · About LEMON Manuals