LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine & Automatic Transmission Cooling System >> Engine >> HOUSING, Coolant Outlet >> Installation >> 3.0L Diesel

3.0L Diesel

  1. Position the Water Outlet Housing on the cylinder block.
  2. Install mounting nuts and tighten to 11.8 N.m (105 in. lbs.).
  3. Fill cooling system. See Cooling - Standard Procedure .
  4. Operate engine until it reaches normal operating temperature. Check cooling system for correct fluid levels.
scientia non olet · About LEMON Manuals