LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine & Automatic Transmission Cooling System >> Engine >> BOTTLE, Coolant Recovery >> Removal >> Removal

BOTTLE, Coolant Recovery: Removal: Removal

Fig 1: Coolant Recovery Container
GC0095202Courtesy of CHRYSLER LLC
1 - COOLANT RECOVER TUBE
2 - NUT
3 - COOLANT RECOVERY CONTAINER
4 - COOLANT RECOVERY PRESSURE CAP
  1. Partially drain cooling system using the draincock only. See Cooling - Standard Procedure . Drain system below level of the coolant recovery pressure container.
  2. Remove coolant recovery container pressure cap (4).
  3. Remove and plug coolant recovery tube (1).
  4. Remove mounting nuts (2).
  5. Remove coolant recovery container (3) from vehicle.
scientia non olet · About LEMON Manuals