LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine & Automatic Transmission Cooling System >> Accessory Drive >> TENSIONER, Belt >> Removal >> 3.0L Diesel

3.0L Diesel

Fig 1: Identifying Drive Belt - 3.0L Diesel
GC0079898Courtesy of CHRYSLER LLC
WARNING: Because of high spring pressure, do not attempt to disassemble automatic tensioner. Unit is serviced as an assembly.
  1. Disconnect negative battery cable.
  2. Remove accessory drive belt. See Cooling/Accessory Drive/BELT, Serpentine - Removal .
  3. Remove belt tensioner retaining bolt and remove tensioner from bracket.
scientia non olet · About LEMON Manuals