LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine & Automatic Transmission Cooling System >> Accessory Drive >> TENSIONER, Belt >> Removal >> 2.7L

TENSIONER, Belt: Removal: 2.7L

Fig 1: Tensioner - 2.7L Engine
GC0079900Courtesy of CHRYSLER LLC
1 - TENSIONER
2 - BOLT
  1. Remove accessory drive belt. See Cooling/Accessory Drive/BELT, Serpentine - Removal .
    WARNING: Because of high spring pressure, do not attempt to disassemble automatic tensioner. Unit is serviced as an assembly.
  2. Remove tensioner assembly bolt (2).
  3. Remove tensioner assembly (1) from mounting bracket.
scientia non olet · About LEMON Manuals