LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine & Automatic Transmission Cooling System >> Accessory Drive >> TENSIONER, Belt >> Installation >> 3.0L Diesel

3.0L Diesel

Fig 1: Identifying Drive Belt - 3.0L Diesel
GC0079898Courtesy of CHRYSLER LLC
  1. Install belt tensioner on bracket. Tighten retaining bolt to 47 N.m (34 ft. lbs.).
  2. Install accessory drive belt. See Cooling/Accessory Drive/BELT, Serpentine - Installation .
  3. Connect negative battery cable.
scientia non olet · About LEMON Manuals