LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Electronic Shift Module (ESM) - Electrical Diagnostics >> DTC Troubleshooting >> P0607-Ecu Internal Performance - ESM >> Diagnostic Test

Diagnostic Test

  1. SHIFTER LEVER ASSEMBLY 

    View repair

    Repair 

    • Using the schematics as a guide, check the Shift Lever Assembly Control Module terminals for corrosion, damage, or terminal push out. Pay particular attention to all power and ground circuits. If no problems are found, replace the Shift Lever Assembly per the Service Information.
    • Perform NAG1 TRANSMISSION VERIFICATION TEST. Refer to DTC-Based Diagnostics/MODULE, Transmission Control (TCM) - Standard Procedure .