LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension >> Front >> Hub And Bearing >> Removal >> RWD

Hub And Bearing: Removal: RWD

Fig 1: TIRE AND WHEEL MOUNTING
GC0079683Courtesy of CHRYSLER LLC
  1. Raise and support vehicle. Refer to Vehicle Quick Reference/Hoisting - Standard Procedure
  2. Remove wheel mounting nuts (3), then tire and wheel assembly (1).
  3. Access and remove front brake rotor. Refer to Brakes/Hydraulic/Mechanical/ROTOR, Brake - Removal
    Fig 2: DUST CAP AND HUB NUT
    GC0079686Courtesy of CHRYSLER LLC
  4. Remove dust cap (2). When doing this, avoid damaging internal bore of hub to preserve seal integrity.
  5. Remove hub nut (1).
  6. Slide hub and bearing off knuckle spindle.
scientia non olet · About LEMON Manuals