Hub And Bearing: Removal: AWD

Fig 1: TIRE AND WHEEL MOUNTING

Courtesy of CHRYSLER LLC

Raise and support vehicle. Refer to Vehicle Quick Reference/Hoisting - Standard Procedure
Remove wheel mounting nuts (3), then tire and wheel assembly (1).

Fig 2: AWD AXLE HALF SHAFT HUB NUT
Courtesy of CHRYSLER LLC
While a helper applies brakes to keep hub from rotating, remove hub nut (1) from the axle half shaft (2).
Access and remove front brake rotor. Refer to Brakes/Hydraulic/Mechanical/ROTOR, Brake - Removal

Fig 3: HUB AND BEARING MOUNTING
Courtesy of CHRYSLER LLC
Remove four bolts (3) fastening hub and bearing (2) to knuckle.
Slide hub and bearing (2) off axle half shaft (1) and knuckle.