LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> Restraints >> Seat Belts >> Restraints System (Service Information) >> RETRACTOR, Seat Belt >> Installation >> Installation >> Rear Center - Wagon

Rear Center - Wagon

Fig 1: Removing/Installing Rear Center Seat Belt Retractor
GC0080221Courtesy of CHRYSLER LLC
  1. Position the rear center retractor into position in the seat back.
  2. Install the one bolt (2) holding the rear center seat belt retractor. Torque nut to 34 N.m (25 ft. lbs.).
  3. Install the left seat back trim cover (60% portion of the rear folding seats). Refer to INSTALLATION .
scientia non olet · About LEMON Manuals