Air Outlet - CHRYSLER
NOTE:
Only the outboard instrument panel air outlets can be serviced separately. For service of the other instrument panel air outlets. Refer to Body/Instrument Panel/BEZEL, Instrument Cluster - Removal
.
NOTE:
LHD model shown in illustrations. RHD model similar.
- Using Trim Stick C-4755 (1) or equivalent, gently pry on both sides of the outboard instrument panel air outlet(s) (2), near the bottom of the outlet, until the air outlet snap clip retainers are released from the face of the instrument panel (3).
- Gently slide the air outlet(s) rearward to release the top of the outlet (demister outlet) from the instrument panel.