LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC System (Service Information) >> Distribution >> Housing, HVAC >> Disassembly >> Housing-Air Inlet

Housing-Air Inlet

NOTE: The air inlet housing must be removed from HVAC housing and disassembled for service of the recirculation-air door.
Fig 1: Housing-Air Inlet D and A
GC0081042Courtesy of CHRYSLER LLC
NOTE: LHD model shown in illustrations. RHD model similar.
  1. Remove the air inlet housing (1) from the HVAC housing and place it on a workbench. See Heating and Air Conditioning/Distribution/HOUSING, HVAC - Removal 
  2. Remove the three screws (2) that secure the recirculation door actuator (3) to the air inlet housing and remove the actuator.
  3. Remove the recirculation-air door (4) from the air inlet housing.
scientia non olet · About LEMON Manuals