DTC 35: Failed Cool Down: Notes
For complete wiring diagrams refer to:
- SYSTEM WIRING DIAGRAMS for 300.
- SYSTEM WIRING DIAGRAMS for Charger.
- When Monitored:
When the Cool down Test is executed.
- Set Condition:
If the A/C system is unable to lower the evaporator temperature 11.11°C (20°F).
| Possible Causes |
|---|
| PREREQUISITES NOT MET BEFORE RUNNING THE COOL DOWN TEST |
| ANOTHER RELATED SYSTEM NOT FUNCTIONING CORRECTLY |
| POWERTRAIN SYSTEM FAULTS PRESENT |
NOTE:
This DTC will display as active if the ignition is not cycled after running the Cool down Test. Otherwise, it will display as stored until cleared.