Diagnostic Test
WARNING: This page is about a different variant/trim than selected.
- CHECK FOR RELATED DTCS
- With the scan tool, check for Transmission Line Pressure DTCs.NOTE: In order to erase this DTC you must reset (erase) the VLP Shift Counter and the Output tooth counter. This is a single procedure in the scan tool called "Clear Variable Line Pressure (VLP) counters".
Repair
- Refer to DTC Based Diagnostics and perform the appropriate diagnostic procedure. See DTC-Based Diagnostics/MODULE, Powertrain Control (PCM) - Diagnosis and Testing
- With the scan tool, check for Transmission Line Pressure DTCs.