LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (6.1L Engine (Service Information)) >> Engine Block >> LIFTER(S), Hydraulic, Roller >> Diagnosis and Testing >> Hydraulic Roller Tappets >> Oil Level - High

Oil Level - High

WARNING: This page is about a different variant/trim than selected.

If oil level is above the FULL mark, it is possible for the connecting rods to dip into the oil. With the engine running, this condition could create foam in the oil pan. Foam in oil pan would be fed to the hydraulic tappets by the oil pump causing them to lose length and allow valves to seat noisily.

scientia non olet · About LEMON Manuals