LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (42RLE Automatic Transmission (Service Information)) >> SHIFTER, Transmission >> Removal >> Shifter - Floor Mount

Shifter - Floor Mount

WARNING: This page is about a different variant/trim than selected.
Fig 1: Gearshift Cable at Shifter Assembly
GC0081250Courtesy of CHRYSLER LLC
1 - GEARSHIFT CABLE
2 - CABLE RETAINER AND NOTCH
3 - SHIFTER ASSEMBLY PIN
4 - SHIFT LEVER
5 - ADJUSTMENT BOLT
  1. Remove any necessary console parts for access to shift lever assembly and shifter cables. Refer to Body/Interior/CONSOLE, Floor - Removal .
  2. Shift transmission into PARK.
  3. Disconnect the transmission shift cable (1) at shift lever (3) and shifter assembly bracket (2).
  4. Remove the shift cable retainer (2) from the notch in the shifter assembly (2).
    Fig 2: Shifter Wiring Connectors - Typical
    GC0081292Courtesy of CHRYSLER LLC
    1 - SHIFTER ASSEMBLY
    2 - WIRING CONNECTORS
  5. Disengage all wiring connectors (2) from the shifter assembly (1).
    Fig 3: Shifter Assembly
    GC0081293Courtesy of CHRYSLER LLC
    1 - SHIFTER ASSEMBLY
    2 - NUTS
    3 - GEARSHIFT CABLE
  6. Remove all nuts (2) holding the shifter assembly (1) to the floor pan.
  7. Remove the shifter assembly (1) from the vehicle.
scientia non olet · About LEMON Manuals