LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (42RLE Automatic Transmission (Service Information)) >> SENSOR, Transmission Range >> Removal >> Removal

SENSOR, Transmission Range: Removal: Removal

WARNING: This page is about a different variant/trim than selected.
Fig 1: Manual Shaft Seal - Typical
GC0081347Courtesy of CHRYSLER LLC
1 - SEAL
2 - MANUAL SHAFT
  1. Remove valve body assembly from vehicle. See Transmission and Transfer Case/Automatic - 42RLE/VALVE BODY - Removal .
  2. Remove the manual shaft seal (1) .
    Fig 2: Manual Shaft Retaining Screw
    GC0082093Courtesy of CHRYSLER LLC
    1 - SCREW
    2 - TRS
  3. Remove manual shaft/TRS retaining screw (1) .
  4. Slide TRS off of manual valve shaft.