LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (42RLE Automatic Transmission (Service Information)) >> Diagnosis and Testing >> Hydraulic Pressure Tests >> TEST FOUR - SELECTOR IN DRIVE (OD ON - Fourth Gear)

TEST FOUR - SELECTOR IN DRIVE (OD ON - Fourth Gear)

WARNING: This page is about a different variant/trim than selected.
NOTE: This test checks the 2/4 clutch hydraulic circuit.
  1. Attach gauge to the 2/4 clutch tap.
  2. Move selector lever to the DRIVE position.
  3. Allow vehicle front wheels to turn and increase throttle opening to achieve an indicated vehicle speed of 30 mph. Vehicle should be in fourth gear.
  4. The 2/4 clutch pressure should read 75 to 95 psi.
scientia non olet · About LEMON Manuals