LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (2.7L Engine (Service Information)) >> Engine Block >> ROD, Piston and Connecting >> Standard Procedure >> Standard Procedure - Fitting Pistons >> Piston Pins

Piston Pins

WARNING: This page is about a different variant/trim than selected.

The piston pin is full floating and is held in place by lock rings. Do Not switch pistons with other rods  . Pistons and connecting rods are serviced as an assembly for balance.

scientia non olet · About LEMON Manuals