LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (2.7L Engine (Service Information)) >> Engine Block >> COLLAR, Structural >> Removal >> Removal

COLLAR, Structural: Removal: Removal

WARNING: This page is about a different variant/trim than selected.
Fig 1: Locating Battery
GC0081581Courtesy of CHRYSLER LLC
  1. Disconnect negative battery (1) cable located in the trunk.
  2. Raise vehicle.
    Fig 2: Lower Splash Shield
    GC0081583Courtesy of CHRYSLER LLC
  3. Remove lower splash shield retaining bolts (1) and splash shield (2).
    Fig 3: Identifying Engine Mounts, Oil Pan, Drain Plug & Oil Filter
    GC0081584Courtesy of CHRYSLER LLC
  4. Remove oil filter (3).
  5. Remove oil pan (4). See Engine/Lubrication/PAN, Oil - Removal .
    Fig 4: Windage Tray
    GC0081627Courtesy of CHRYSLER LLC
  6. Remove oil pump pickup tube (2).
  7. Remove windage tray/outer main bearing cap bolts (3).
  8. Remove windage tray (1).
scientia non olet · About LEMON Manuals