LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (Vehicle Theft Security System (Service Information)) >> Siren - Export >> Installation

Siren - Export: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/ Installing Vehicle Theft Security Siren
GC0041446Courtesy of DAIMLERCHRYSLER CORP.
  1. Position siren (1) and install retaining screws (2).
  2. Connect the siren electrical connector.
  3. Install air blocker in original position.
  4. Install the left front wheel well splash shield (Refer to BODY/EXTERIOR/FRONT END SPLASH SHIELDS - INSTALLATION) .
  5. Connect the battery negative cable.
scientia non olet · About LEMON Manuals