LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (Vehicle Theft Security System (Service Information)) >> Service Information >> Operation >> Vehicle Theft Alarm >> Enabling

Vehicle Theft Alarm: Enabling

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

The CCN must have the VTA function electronically enabled in order for the VTA to perform as designed. The logic in the CCN keeps its VTA function dormant until it is enabled using a diagnostic scan tool. The VTA function of the CCN is enabled on vehicles equipped with the VTA option at the factory, but a service replacement CCN must be VTA-enabled by the dealer using a diagnostic scan tool. Refer to the appropriate diagnostic information.

scientia non olet · About LEMON Manuals