LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (Vehicle Theft Security System (Service Information)) >> Hood Ajar Switch - Export >> Removal

Hood Ajar Switch - Export: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Hood Ajar Switch Location
GC0020025Courtesy of DAIMLERCHRYSLER CORP.
  1. Open hood.
  2. Disconnect and isolate the battery negative cable.
  3. Disconnect wire harness connector from hood ajar switch (1).
  4. Firmly press tangs on the bottom side of the switch together and push up through bracket.
  5. Remove switch from vehicle.
scientia non olet · About LEMON Manuals