LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (Vehicle Theft Security System (Service Information)) >> Hood Ajar Switch - Export >> Installation

Hood Ajar Switch - Export: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Hood Ajar Switch Location
GC0020025Courtesy of DAIMLERCHRYSLER CORP.
  1. Firmly press hood ajar switch through bracket.
  2. Connect wire harness connector to hood ajar switch (1).
  3. Connect the battery negative cable.