Rear Suspension: Bar-Stabilizer: Description
WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - LINK |
| 2 - STABILIZER BAR |
| 3 - CUSHION |
| 4 - RETAINER |
Some versions of this vehicle are equipped with a rear stabilizer bar (2). The stabilizer bar interconnects the rear axle with the frame rails of the vehicle.
Attachment of the stabilizer bar to the rear frame rails is through two rubber-isolator stabilizer bar links (1). The stabilizer bar attachment to the axle is done utilizing two rubber isolated cushions (3) and retainers (4).