Hub / Bearing: Bar-Stabilizer: Description
WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - STABILIZER BAR CUSHION RETAINERS |
| 2 - CUSHIONS |
| 3 - FRONT STABILIZER BAR |
| 4 - STABILIZER BAR LINKS |
The stabilizer bar (3) interconnects both front lower control arms of the vehicle and is attached to the front suspension crossmember.
Attachment of the stabilizer bar to the front suspension crossmember is through two rubber-isolator cushion (2) and retainers (1). The stabilizer bar attachment to the lower control arm is done by utilizing an isolated stabilizer bar link (4) at each arm. All components of the stabilizer bar are serviceable.