Transponder - TPM: Installation: Rear
WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
- Position transponder (2) on body seam flange (4) and install mounting nuts (1).
- Connect wiring harness connector (3) at transponder (2).
- Install wheelhouse splash shield and all components removed to access it. (Refer to BODY/EXTERIOR/REAR WHEELHOUSE SPLASH SHIELD - INSTALLATION)
- Perform TPM Diagnostic Verification Test. (Refer to TIRES/WHEELS/TIRE PRESSURE MONITORING - DIAGNOSIS AND TESTING)