LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Tires & Wheels (Service Information)) >> Tires >> Description >> Tire >> Tire Identification

Tire Identification

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Tire type, size, load index and speed rating are encoded in the letters and numbers imprinted on the side wall of the tire. Refer to the Tire Identification chart to decipher the code. For example purposes, the tire size P225/60 R 16 97 T is used in the chart. An All Season type tire will also have either M + S, M & S or M - S (indicating mud and snow traction) imprinted on the side wall. An Extra or Light Load marking "XL" or "LL" may also be listed on the sidewall. The absence of an "XL" or "LL" marking infers a standard load tire.

TIRE IDENTIFICATION

TIRE TYPE (Not present on all tires) P - Passenger
T - Temporary
C - Commercial
LT - Light Truck
225  SECTIONAL WIDTH SHOWN IN MILLIMETERS
60  ASPECT RATIO SECTIONAL HEIGHT divided by SECTIONAL WIDTH *
CONSTRUCTION TYPE R - RADIAL
B - BIAS BELTED
D - DIAGONAL (BIAS)
16  WHEEL DIAMETER SHOWN IN INCHES
97  LOAD INDEX **
SPEED RATING **
Fig 1: Tire Aspect Ratio
GC0000918Courtesy of DAIMLERCHRYSLER CORP.
1 - SECTIONAL WIDTH
2 - SECTIONAL HEIGHT
NOTE: Height (2) divided by Width (1) = Aspect Ratio.
NOTE: Consult the tire manufacturer regarding any questions on tire specifications or capabilities.