LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Tires & Wheels (Service Information)) >> Tires/Wheels >> Removal >> Tire And Wheel Assembly (Aluminum Wheel)

Tire And Wheel Assembly (Aluminum Wheel)

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise vehicle so tire and wheel assembly clears ground level.
    Fig 1: Center Cap Removal Notch
    GC0013323Courtesy of DAIMLERCHRYSLER CORP.
  2. If vehicle is equipped with wheel center caps covering wheel nuts, remove cap with appropriate removal tool utilizing notch formed into wheel (2) near valve stem (1). Use care not to damage wheel coating.
    Fig 2: Tire And Wheel Mounting
    GC0012971Courtesy of DAIMLERCHRYSLER CORP.
  3. Remove five wheel mounting (lug) nuts (3) from studs.
  4. Remove tire and wheel assembly (1) from hub.
scientia non olet · About LEMON Manuals