Vehicle Speed Sensor: Installation
WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - CONNECTOR |
| 2 - SENSOR |
| 3 - O-RING |
| 4 - SPEEDO PINION |
- Install pinion gear to speed sensor (1). See Fig 1.
- Using a NEW o-ring (3), install the speed sensor (2) to the transaxle.
- Install the bolt and torque to 7 N.m (60 in. lbs.).
- Connect speed sensor connector (1).
- Lower vehicle and road test to verify proper speedometer operation.