Shift Selector Shaft Bushing: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Selector Shaft Bushing Removal

Courtesy of DAIMLERCHRYSLER CORP.

1 - REMOVER 6786

2 - SHIFT SHAFT BUSHING

3 - SLIDE HAMMER C-3752

Remove selector shaft using .
Thread Remover 6786 (1) into bushing. See Fig 1.
Install slide hammer C-3752 (3) onto tool and remove bushing (2) using slide hammer.