Shift Crossover Shaft: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Crossover Shaft Snap Ring

Courtesy of DAIMLERCHRYSLER CORP.

1 - SELECTOR SHAFT

2 - CROSSOVER SHAFT

3 - SNAP RING

Disassemble transaxle.
With the transaxle disassembled, remove the crossover shaft seal.
Using snap-ring pliers, remove the snap ring (3) at the crossover shaft bore. See Fig 1.
Push the crossover shaft (2) in the case and remove the crossover assembly.