Shift Crossover Lever: Removal
WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of DAIMLERCHRYSLER CORP.
| 1 - CROSSOVER LEVER |
| 2 - CROSSOVER CABLE |
| 3 - SELECTOR CABLE |
| 4 - SELECTOR LEVER |
- Disconnect crossover cable (2) from crossover lever (1) and cable bracket. Refer to REMOVAL under GEAR SHIFT CABLE
. See Fig 1.
- Using a pin punch, remove the crossover roll pin from lever (4).
- Pull up and remove the crossover lever (4) from the transaxle crossover shaft.