Output Bearing And Race: Installation
WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - HANDLE C-4171 |
| 2 - INSTALLER C-4628 |
| 3 - OUTPUT BEARING RACE |
- Line up output bearing race (3) to race bore. See Fig 1.
- Insert tool Installer 4628 (2) with Handle C-4171 (1) into output bearing race. Tap race into bore. Install output bearing into race. Verify that the larger diameter cage is facing outward. Position bearing retaining strap. Tighten bolts to 11 N.m (96 in. lbs.).