LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (T350 Manual Transmission - Diagnosis & Testing & Overhaul) >> T350 Manual Transaxle >> Axle Seal >> Installation

Axle Seal: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean axle shaft seal bore of any excess sealant.
  2. Align axle shaft seal with axle shaft seal bore.
  3. Install axle seal on Seal Installer 6709 and Handle C-4171 and insert into axle shaft seal bore.
  4. Tap seal into position until seated against transaxle case.
  5. Install axle shaft. (Refer to DIFFERENTIAL & DRIVELINE/HALF SHAFT - INSTALLATION)
  6. Check transaxle fluid level and adjust as necessary.
scientia non olet · About LEMON Manuals