LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (G288 Manual Transmission - Overhaul) >> Output Shaft >> Synchronizer >> Assembly

Output Shaft: Synchronizer: Assembly

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Synchronizer Disassembly
GC0022218Courtesy of DAIMLERCHRYSLER CORP.
1 - SYNCHRONIZER HUB
2 - SYNCHRONIZER SLEEVE
3 - STRUT ASSEMBLY
  1. Install synchronizer sleeve (2) to synchronizer hub (1). See Fig 1. Install three (3) strut assemblies.
scientia non olet · About LEMON Manuals