Backup Lamp Switch: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Backup Lamp Switch

Courtesy of DAIMLERCHRYSLER CORP.

1 - BACKUP LAMP SWITCH

Install backup lamp switch (1) and torque to 24 N.m (18 ft. lbs.). See Fig 1.
Connect backup lamp switch connector.

Fig 2: Engine Compartment Lower Silencer
Courtesy of DAIMLERCHRYSLER CORP.

1 - ENGINE COMPARTMENT SILENCER

2 - ACCESSORY DRIVE BELT SPLASH SHIELD
Diesel Models: Install engine compartment lower silencer (1). See Fig 2.
Lower vehicle.
Connect battery negative cable.