LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 ((40/41TE Automatic Transmission - Electrical Diagnostics)) >> Electrical Diagnostics >> DTC Troubleshooting >> P0992-2/4/Od Hydraulic Pressure Test >> Diagnostic Tests

Diagnostic Tests

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. 1)  CHECK TO SEE IF DTC P0992 IS CURRENT 
    NOTE: The vehicle must be driven to set this DTC. The transmission must at operating temperature with the Engine RPM above 1000 RPM.

    This DTC is an indication of both the 2/4 and the O/D Hydraulic Pressure Switch DTCs present.

    Perform the diagnostic procedures for both P0845 and P0870.

    With the scan tool, check the DTC EVENT DATA to help identify the conditions in which the DTC was set.

    If there are no possible causes remaining, view repair. 

    Repair 

    1. Refer to DIAGNOSTIC CODE INDEX and perform the appropriate diagnostic procedure(s).
    2. Perform 40/41 TE TRANSMISSION VERIFICATION TEST - VER 1  .
scientia non olet · About LEMON Manuals