LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Fuel System) >> Fuel Injection - 2.2L Diesel >> Camshaft Position Sensor >> Removal

Camshaft Position Sensor: Removal

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable.
  2. Remove the engine cover. On 1.6L, (Refer to ENGINE - REMOVAL) or on 2.4L, (Refer to ENGINE - REMOVAL)
  3. Disconnect camshaft position sensor electrical connector.
  4. Remove retaining bolt and remove sensor from cylinder head cover.
scientia non olet · About LEMON Manuals