LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Fuel System) >> Fuel Injection - 2.2L Diesel >> Camshaft Position Sensor >> Installation

Camshaft Position Sensor: Installation

WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install camshaft position sensor into cylinder head cover.
  2. Connect electrical connector.
  3. Install engine cover. On 1.6L, (Refer to ENGINE COVER - INSTALLATION) or on 2.4L, (Refer to ENGINE COVER - INSTALLATION) .
  4. Connect negative battery cable.
scientia non olet · About LEMON Manuals